Home > General > Bootdisk.com


It alowed me to use my Western Digital external USB HD in DOS. [config.sys] LASTDRIVE=Z DEVICE = usbaspi4.sys /int /all DEVICE = usbaspi5.sys /int /all DEVICE = usbaspi5.sys /int /all /D1 Make sure tho you have at least mscdex.exe and himem.sys on your bootdisk. They put the utilities you need in a ramdrive, or virtual disk which is usually the next drive letter up from your hard drive partitions. DocMemory 2.2 | On a Bootable CD.

used], I loaded DEVICE=ASPIOHCI.SYS /int /all, also a Iomega driver. METHODS Method 1 - The fastest and easiest utility to create a bootable USB drive. Read ntfsboot.txt in the zippack for complete directions. For example, on old Toshiba's there is a tsetup file in c:\dos. http://www.bootdisk.com/

HP USB Disk Storage Tool | hpflash2.zip Bootable BIOS Flashing CD For Adding Your BIOS Files To | flashcd1.zip | Readme Click the button below to Checkout via PayPal to get Note that after XP is installed you can easily convert to the NTFS file system without data loss using the convert utilitiy included in XP. +++++++++++++++++++++++++++++++++++++++++++++++ All I want to do Both utils will now work as designed. Yes.

Now format. The Utilities are unbeatable. Your CDrom drive will be assigned the next drive letter after your hard drive partitions (and) other IDE devices. I no longer have to change CDs every 5 minutes for a full hour...

Most all burning programs have this ability so read the docs on how to do it. For example, if you have it connected on the same flat ribbon cable as your hard drive, make sure the hard drive is set to master and the cdrom is set Supplemental Note #4: After you make any bootdisk using any method even an image program the very first thing to do is WRITE PROTECT it. http://www.bootdisk.com/helpdesk.htm The /L:R tells your computer to make your cdrom drive letter R.

If you have onboard video often you have to look for the video chip to get the maker and number. In summary, the USB DOS mice "driver" files are very limited in their use. Fix Just About Every Problem. One can use aefdisk to instantly wipe out all the partitions.

Canada When the automatons finally take over, you'll for sure be humanity's best hope for survival Lu Johnson America SCSI SUPPORT If you have Select Create New Filesystem. Click Next. 5. Why?

Pay close attention to the screens to see the exact letter. Click HERE Windows Boot Disks. 2000 And NT Setup Disk Sets W2K Pro: Disk1 | Mirror Disk2 | Mirror Disk3 | Mirror Disk4 | Mirror makeboot.exe | Mirror makebt32.exe| Mirror W2K: Fix Just About Every Problem. DOS USB Driver | Collection For CDroms, Hard Drives, Etc.

Finally, assure that the Onboard FDC Swap A & B is set to No Swap if your 1.44 is at the end of your floppy cable. Yes. Click HERE Utilities DOStools HOME HOME Utilities DOStools Excellent Windows PC Help Sites __________ Jim Eshelman Harry Waldron How To Boot From A USB Screenshot.

http://www.bootdisk.com/helpdesk.htm +++++++++++++++++++++++++++++++++++++++++++++++ I sent you some email but you didn't respond. Fix Just About Every Problem. Try Ultra ISO for that.


To relax I run this website and try to put as much self-help info on it as possible. In other words use the bootdisk you need that matches the OS you want to install ie win95/win98. It's 156K bytes so you may have to remove some of the utils on your bootdisk if you don't have enough room for the scsi drivers. If you get real desperate, you can sometimes take out a set of RAM which may cause an adjustment notice where the directions may appear on how to access, or just

No problem. Ok, suppose you tried doing it manually, and already did a sys a:, or made a bootdisk with windows and it still doesn't see your cdrom and you're at the end Downloaded dos usb drivers and it works great. Or, one can use Winimage to just create a single bootdisk. 3.

You first have to make a bootable floppy disk as noted in the answer just above, then keep the floppy in your A: drive and use your burning program to create Do this before you even do a dir on the disk. That's the reason we often have to force it to use a standard VGA card in advance of pointing it to the correct driver folder. They are beginning to put special un-installers for download that you can use.

Also note that windows really doesn't like being installed from a usb device so if you only have a usb cdrom drive and need to install windows its best to copy Both programs have testing software built in. Or, another way: Do a sys a: from a C:\_ prompt and then download shebang2 to an empty folder on your hard drive, click on it and copy the contents to No Floppy drive needed to use this utlilty and make your C: drive bootable.

Does not install/use C: SPELL CHECKERS ieSpell For IE TinySpell BROKEN LINK FINDERS Link Sleuth For Your Webpage DeadLink For Bookmarks FREE EMAIL CLIENTS Pegasus Thunderbird 2.X Scribe QuickMailer FTP Clients METHOD 1 - The DUSE System Example 1 Using DUSE [config.sys] device=a:\himem.sys devicehigh=a:\emm386.exe device=a:\usbaspi.sys dos=high,umb Note: You can find a usbspi.sys on the internet or use on of the five different From A Gorman (UK) This site is excellent. It uses IOmega USB drivers and Guest.exe.

Oddly enough, if you have a USB floppy drive connected to your PC some of these cdrom/hard/zip drive drivers will fail to load or the above bootdisk will fail to work.

© Copyright 2017 tcdownload.org. All rights reserved.